Take Stereo Audio the Distance with the New TV One-Task Cat 5 Extender

TV One-task has added the 1T-VGAST-CAT-XL, which is capable of sending and then outputting the stereo audio along with the VGA signal over a distance up to 1000 feet.

 

ERLANGER, KY, May 24, 2007—The popular Cat.5 series in the TV One-task line has added the 1T-VGAST-CAT-XL. This unit can send both stereo audio, either from a PC or microphone, and a 1280x1024 VGA resolution image to a maximum distance of 1000 feet.

 

The unit consists of a transmitter that takes in the Stereo Audio and VGA signal and the receiver which outputs the same Stereo Audio and VGA Signal. This makes it possible to send both signals to a remote location and maintain the Stereo Audio. A VGA loop-thru is provided and there are gain and equalization adjustments at each receiver.

  for more information and pricing

The 1T-VGAST-CAT-XL has a locking DC connector and is RoHS compliant. The suggested retail price for the 1T-VGAST-CAT-XL is $495 and is available now.

1T-VGA-CAT consists of a transmitter and receiver unit capable of encoding and decoding of up to 1280x1024 VGA resolution signal into a bit stream suitable for remote viewing using a single, dedicated CAT 5 grade network cable. Transmission distances of 590 feet (180m) are possible with this device. One transmit/receive pair will provide an image to a single remotely located VGA monitor or projector.

1T-VGA-CAT-XL has the same features, resolution, encode and decode capabilities of the 1T-VGA-CAT but doubles the range to 1000 feet (300m). VGA loop-thru is provided on the 1T-VGA-CAT-XL Transmitter.

1T-VGAST-CAT-XL is the same as the 1T-VGA-CAT-XL but adds the ability to include either PC audio or external microphone audio in the CAT.5 signal.

1T-VGA4-CAT-TXL and 1T-VGA8-CAT-TXL encode a VGA signal of up to 1280x1024 resolution and feed 4 or 8 CAT 5 cables respectively over distances of up to 1000 feet (300m). VGA loop-thru is provided with these units.

1T-VGA-CAT-RXL decodes signals received via CAT 5 cables from the 1T-VGA4-CAT-TXL or 1T-VGA8-CAT-TXL transmitter. A dedicated CAT 5 cable plus a dedicated 1T-VGA-CAT-RXL receive unit is required for each remotely located VGA display device. Equalization and gain controls are provided for each receiver.